14
Single Step Adv button
- This function advances a magazine by single step(s) into the Irradiator. The number of
steps from home appears in the step counter window to the right of this function.
Single Step Rev button
- This function reverses by single step(s) a magazine out of the Irradiator. The number of
steps from home appears in the step counter window to the left of this function.
Next Slot Adv button
- This function advances a magazine by one full slot into the Irradiator.
Prev Slot Rev button
- This function reverses a magazine by one full slot out of the Irradiator.
Mag Start indicator
- Monitors the status of the magazine drive home (origin) sensor RSR5. When the UD-740
magazine is properly inserted or fed, this signal will change from a logic 0 to a logic 1 to indicate the magazine is
home (at origin), and the first badge position is ready to be processed.
Badge Present indicator
- Monitors the status of the badge present sensor RSR6. When a magazine is
indexed to a slot number, this signal will change from a logic 0 to logic 1 to indicate the presence of a badge in the
respective slot.
Mag End indicator
- Monitors the status of the magazine end sensor RSR7. When the magazine has indexed
to the last slot (slot number 50), this signal will change from logic 0 to logic 1 to indicate the end of the magazine
tray.
Mag Aligned indicator
- Monitors the status of the magazine slot sensor RSR10. When a magazine is indexed
to a slot number, this signal will change from a logic 0 to a logic 1 if that slot (can be any one of the slots, 1 - 50) is
properly centered above the badge push-up mechanism.
Mode\Reader Check\Loader Test MENU – Slider Arm functions
These functions allow the operator to test and exercise the Irradiator Irradiator system slider arm motor (vertical
drive) mechanics.
Next Position button
- Moves the badge to the next position. If the badge is in the home position, then this
function moves the badge to the NCR position. If the badge is in the NCR position, this function moves the badge
to the irradiate position. If the badge in the irradiate position, this function moves the badge to the NCR position.
If the badge in the NCR position, this funciton moves the badge to the home position.
Align Slide Motor button
- Aligns the badge push-up mechanism to the home or origin position.
Single Step Up
- Single steps the badge push-up mechanism up. The number of steps from the home position
is displayed in the step counter window to the right of this function.
