5
UG25A
Safety precautions
Always follow these instructions
Do not damage the power cord or plug
of the AC adaptor.
(Do not cut or modify. Do not forcefully bend, twist or pull.
Do not put near heating appliances or put anything heavy
on top. Do not bundle.)
If damaged power cord or plug is used, short circuit etc.
may occur and cause electric shock or fire.
●
Contact the dealer for repair of the power cord or plug.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Do not use more than the rating of the
electrical outlet or wiring accessories.
Do not connect this product to a
power supply except rated voltage
and rated frequency.
If you exceed the rating by using a power strip etc., heat
generation may occur and cause fire.
Do not connect or disconnect the AC
adaptor with wet hands.
It may cause electric shock.
Do not stretch the power cord of AC
adaptor during operation.
It may damage the power cord,
resulting in short circuit that causes
electric shock or fire.
Do not place the product on the power
cord of its AC adaptor.
It may damage the power cord,
resulting in short circuit that causes
electric shock or fire.
Do not pull the power cord of the AC
adaptor when carrying the product.
It may damage the power cord, resulting in short circuit
that causes electric shock or fire.
Do not wind the power cord of AC
adaptor around the main body
and the stand.
It may damage the power cord,
resulting in short circuit that causes
electric shock or fire.
When a failure or malfunction occurs,
stop using the product immediately
and disconnect the AC adaptor from
the power supply.
Otherwise, heat generation may occur, causing electric
shock or fire.
[Examples of failure/malfunction]
• The product does not operate, even though the power
is turned on.
• Abnormal noise is observed during operation.
• Moving the power cord stops operation.
• Burning smell is found.
• The power cord or the AC adaptor becomes abnormally hot.
●
Contact the dealer immediately for maintenance/repair.
Make sure the power plug of the
AC adaptor is fully inserted into the
socket.
Loose engagement of the plug and socket may cause
electric shock or fire due to overheating.
• Do not use a damaged plug or loosen socket.
Always use with the supplied AC
adaptor.
Failure to do so may cause electric shock or fire.
Wipe off dust on the power plug of AC
adaptor periodically.
If the plug is used with dust accumulated on it, humid air
etc. may cause poor insulation and fire.
• Disconnect the AC adaptor and wipe it with a dry cloth.
• Disconnect the AC adaptor when not using for a long
period of time.
WARNING
To avoid the possibility of causing injury to users or damage to
property, please follow all the explanations written below.
• The following symbols differentiate the levels of danger and injury
that may result if the product is improperly used.
WARNING
This symbol indicates that improper
handling may cause a risk of death or
serious injury.
CAUTION
This symbol indicates that improper
handling may cause a risk of injury or
damage to property.
• The following symbols indicate the type of instructions to be
observed. (The symbols given below are examples.)
This symbol denotes
an action that is
PROHIBITED.
This symbol denotes
a COMPULSORY
action.
This symbol denotes
an action that should
be performed carefully.
安全注意事項
Safety precautions
