Setup
TQBS0166
58
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Network Service Settings
Second Screen Browsing
When this function is set to “On”, you can
enjoy the content you are viewing on a
Network Service application of
smartphone, etc. with the home network
on the big screen of your TV.
Lock
You can restrict using Network Service.
• PIN is required to change. (
>
14)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using Network
Service.
• Depending on contents, this function will
not work.
• Select “Off” when the audio is warped.
TV Anywhere Settings
You must register to a service to use this
function. (
>
45)
TV Anywhere
When you control this unit from a
smartphone or a tablet away from home,
set this function to “On”.
Device ID
This is the device ID and device password
required for registering to and using a
service.
Initialize Device Password
The device password for this unit is
initialized.
• When you initialize the device password,
you will not be able to use TV Anywhere.
To use the TV Anywhere again, you must
re-register to the service.
Home Network Settings
You can set the DLNA (Server) function.
(
>
46)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (
>
59)
• When you set “Networked Standby” to
“On”, the setting for this function will also
be changed to “On”, but “Quick Start” will
remain set to “Off”.
• This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
• If “Quick Start” and “Home Network
function” are set to “On”, even when this
unit is turned off, it can be used as a
DLNA Server.
Setting device name
It is also possible to change the name of
this unit on the network.
Conversion Setting for DLNA
• On:
When playing back on DLNA (Client)
compatible equipment, this setting
reduces the chance of break-ups and
freezing of an image by lowering the
image quality.
Resolution Setting for DLNA
When “Conversion Setting for DLNA” is set
to “On”, select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
DMRUBC70-UBS70EG-TQBS0166_eng.book 58 ページ ２０２２年１０月３１日 月曜日 午後３時１２分
