- 9 -
∫
Front
1
Disc tray
2
USB port (
DC 5 V 500 mA)
This port supports USB 2.0 High Speed.
3
Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20
e
up and down, 30
e
left and
right
4
POWER LED
When the unit is turned on, the LED flashes
first, and then lights up.
If the LED keeps flashing, there may be an
error. (
5
Open or close the disc tray
6
Standby/on switch (
Í
/I
)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
∫
Rear
1
AC IN (
) terminal (
2
Cooling fan
3
HDMI AV OUT terminal (
4
LAN port (
1
3
4
2
5
6
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
≥
When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥
If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
3
1
2
4
Class II equipment (The construction of the product is
double-insulated.)