BEFORE PROGRAMMING
P-11
●
Batch Output of Programming Data
When a printer is connected via the optional RS-232C interface, the program settings can be
batch output by operating the administrator’s phone.
1
ON/OFF
(From administrator’s phone)
d
2
# 9 7
d
3
Enter 4-digit ID code (0000-9999).
d
4
Enter output code (0-4).
d
5
#
◆
Output Code
NOTE : You can program TTY parameters.
●
To Enter The Program Mode from Non-Administrator’s Phone
Programming can be performed from telephones other than the administrator’s phone by press-
ing the following button to change the telephone to the temporary programming telephone.
1
ON/OFF
d
2
# 9 8
d
3
Program ID 4-digit code (initial value is 9999).
d
4
ON/OFF
(Finish of assigning temporary administrator’s phone).
d
5
Enter the program mode (See page P-3).
Output Code
Description
0
All set data including program settings
1
All program setting data
2
SSD dial data
3
PSD dial data
4
Extension name, SSD/PSD name and ABM data
