P-17
INITIAL SET TABLE
1#: Automatic conver-
sion enable
0#: Conversion
disable
1#: Changes length of
the DTMF signal
sending time
1#: 480/480 m sec.
2#: 695/695 m sec.
(01-04)07#-
DTMF SIGNAL CONVERSION
(AUTOMATIC)
C
(01-04)08#-
DTMF SIGNAL CONVERSION
(MANUAL)
C
(01-04)09#-
DTMF SIGNAL TIME CHANGE
(AFTER THE OTHER PARTY’S
ANSWER)
C
(01-04)10#-
DTMF SIGNAL TIME TABLE
(AFTER THE CONVERSION)
C
Address
Function
9010#-
BUSY TONE DETECTION LOWER
LIMIT COUNT
9011#-
BUSY TONE DETECTION UPPER
LIMIT COUNT
9012#-
BUSY TONE DETECTION MINI
MUM TIME
(01-04)01#-
DIAL SIGNAL/EXCHANGE LINE
C
(01-04)02#-
DTMF SIGNAL SENDING TIME
C
(01-04)03#-
CONNECTED PHONE LINE
C
(01-04)04#-
(AUTO) PAUSE PBX LINE
C
(01-04)05#-
POOLED TRUNK ACCESS GROUP
(9/0, 811, 812, and 813)
CM
(01-04)06#-
INCOMING RING TONE PATTERN
C
Other settings
0#: 0 time
1#: 1 time
2#: 2 times
3#: 3 times
5#: 5 times
6#: 6 times
7#: 7 times
8#: 8 times
0#: 0 time
1#: 1 time
2#: 2 times
3#: 3 times
4#: 4 times
5#: 5 times
6#: 6 times
8#: 8 times
1#: 146 m sec.
2#: 220 m sec.
3#: 293 m sec.
4#: 366 m sec.
5#: 439 m sec.
0#: 10 pps pulse dial
1#: 125 m sec. ON/
125 m sec. OFF
2#: 250 m sec. ON/
250 m sec. OFF
1#: PBX line
1#: Automatic pause
1#: Pooled trunk access
group 811
2#: Pooled trunk access
group 812
3#: Pooled trunk access
group 813
Initial setting
4#: 4 times
7#: 7 times
0#: 73 m sec.
1#: DTMF signal tone
0#: 80 m sec. ON/
80 m sec. OFF
(Signal length/
Pause length)
0#: Exchange line
0#: No automatic pause
0#: Pooled trunk access
group 9/0
P a g e
P-36
P-36
P-36
P-37
P-37
P-37
P-37
P-37
P-37
9#: 9 times
10#: 10 times
11#: 11 times
12#: 12 times
13#: 13 times
14#: 14 times
15#: 15 times
9#: 9 times
10#: 10 times
11#: 11 times
12#: 12 times
13#: 13 times
14#: 14 times
15#: 15 times
0#:
1sec
2sec
3sec
4sec
5sec
6sec
1#:
2#:
3#:
4#:
5#:
6#:
7#:
8#:
Synchronized
(Initial)
0#: Automatic conversion
disable
1#: Conversion enable
0#: No change
0#: 320/320 m sec.
(Signal length/
Pause length)
P-38
P-38
P-38
P-38
MODE 1 (System Setting)
MODE 2 (Exchange Line Setting)
