P-18
INITIAL SET TABLE
Address
Function
(01-04)11#-
EXTERNAL RINGER CONTROL
C
(01-04)12#-
INCOMING CALL FORWARDING
TO OUTSIDE
C
(01-04)13#-
DELAYED RING TRANSFERRING
TIME
C
(01-04)14#-
INCOMING RING SIGNAL
DETECTION TIME
C
(01-04)15#-
INCOMING RING PATTERN
DETECTION TIMER
C
(01-04)16#-
FL/R KEY TYPE
(01-04)17#-
DT DETECTION AT OUTGOING
CALL
(01-04)18#-
BUSY TONE DETECTION
(01-04)19#-
END DETECTION OF OUTGOING
CALL
M
(01-04)20#-
END DETECTION OF INCOMING
CALL
M
(01-04)21#-
EXCHANGE LINE END DETECTION
MODE
C
(01-04)22#-
BREAK SIGNAL DETECTING
TIMER (to disconnect the Exchange
line)
C
(01-04)23#-
ANSWER DETECTION OF
OUTGOING CALL
(01-04)24#-
DT DETECTION TIME
C
Page
P-38
P-38
P-38
P-39
P-39
P-39
P-39
P-39
P-39
P-40
P-40
P-40
P-40
P-40
Initial setting
0#: Does not ring
1#: Enable call forwarding to
the exchange line
1#: After 15 sec.
3#: More than 200 m sec.
1#: 4 sec.
0#: FLASH
1#: Detects Dial Tone
1#: Detects Busy Tones
None (No Detection)
None (No Detection)
2#: Detection anytime
0#: More than 50 m sec.
3#: Detection by timer and
polarity reverse signal
0#: 0.5 sec.
Other settings
1#: Control only in Day
mode
2#: Control only in
Night mode
3#: Control in both Day
and Night mode
0#: Cannot accept call
forwarding
0#: Disable
2#: After 30 sec.
3#: After 45 sec.
4#: After 60 sec.
0#: More than 50 m sec.
1#: More than 100 m sec.
2#: More than 150 m sec.
4#: More than 250 m sec.
5#: More than 300 m sec.
6#: More than 350 m sec.
7#: More than 400 m sec.
0#: 3 sec.
2#: 5 sec.
3#: 6 sec.
4#: 8 sec.
1#: TIMED BREAK
RECALL
0#: Does not detect Dial
Tone
0#: Does not detect Busy
Tone
1#: Detects by the
polarity reverse
signal
2#: Detects by Break
signal
1#: Detects by the
polarity reverse
signal
2#: Detects by Break
signal
0#: No detection
1#: Detection only
while on HOLD
1#: More than 100 m sec.
2#: More than 200 m sec.
3#: More than 300 m sec.
4#: More than 400 m sec.
5#: More than 500 m sec.
6#: More than 600 m sec.
7#: More than 700 m sec.
1#: Detection by timer
2#: Detection by polarity
reverse signal
1#: 1 sec.
2#: 1.5 sec.
3#: 2 sec.
4#: 2.5 sec.
5#: 3 sec.
6#: 3.5 sec.
7#: 4 sec.
MODE 2 (Exchange Line Setting)
5#: 10 sec.
6#: 12 sec.
7#: 14 sec.
8#: 4.5 sec.
9#: 5 sec.
10#: 5.5 sec.
11#: 6 sec.
12#: 6.5 sec.
13#: 7 sec.
14#: 7.5 sec.
