O-12
Making an Exchange Line Call
FF
1
4
3
2
1
3
2
Line Group Dial................................................................................
This feature is useful when your telephone has more than two exchange lines and you want to select a
specific group. Use this feature when you are calling from an SLT and you need a vacant line.
1
3
4
6
5
2
0
7
9
8
1
3
4
6
5
2
0
7
9
8
Group Code
Telephone
(9, 811, 812, 813)
Number
Group Code
The system can handle up to four exchange lines. All exchange lines belong to group code 9. You can also divide these
exchange lines into group code 811 to 813 by programming. Dialing 9 or one of these group codes opens a vacant line.
Prime Line Preference ....................................................................
You can automatically access a specific line group without pressing the LINE key. You can make a call by
picking up the handset or pressing the ON/OFF key and dialing a telephone number. This feature requires
pre-programming.
1
3
4
6
5
2
0
7
9
8
Telephone
Number
Direct Exchange Line Access ........................................................
You can select an exchange line by pressing an FF key if you have assigned it an exchange line number.
1
3
4
6
5
2
0
7
9
8
Exchange line
Telephone
(FF Key)
Number
Using an FF Key
You can assign SSD codes to FF keys. Once you have assigned them, you can reach the number just by pressing the
FF key instead of dialing the telephone number. Be sure to assign group code 9 before SSD codes.
ON
/
OFF
MEMORY
9
MEMORY
1
3
4
6
5
2
0
7
9
8
HOLD
PGM
1
4
3
2
(
)
( )
Exchange
Line FF key
SSD code 00-89
FF
