P-53
PROGRAMMING (MODE 7)
(10-25: Ex-
tension No.)
09(01-16)#-(0-999999)#
EMERGENCY CALL RESTRICTION
OVERRIDE DATA 1-16 (VALID FOR
RESTRICTION TYPE 0, 1, 2 AND 3 (AL-
LOW TABLE 3)
Restrictions on dialing are cancelled if the maximum 6-
digit number set here matches the number of dialing.
*Exceed dialing data are ignored not send out through
the Exchange line.
0-999999: Dial Number
999 (DATA1)
112 (DATA2)
None (DATA3-16)
Clear : Press FF5 Key
When all of the telephone operation conditions required
by the user are satisfied by the content of the eight
telephone styles set in MODE 3, the following ad-
dresses need not be set:
• (10-25)01#-(0 or 1)# “SSD CALL BARRING OVER-
RIDE”
• (10-25)1n#-(001-4)# “DAY RESTRICTION TYPES
EXCHANGE LINE 1-4”
• (10-25)2n#-(0 or 1)# “NIGHT RESTRICTION
TYPES EXCHANGE LINE 1-4”
(10-25)01#-(0 or 1)#
C
SSD CALL BARRING OVERRIDE
Sets whether or not to override SSD toll restriction.
0#: Call Barring valid
1#: Call Barring overriden
NOTES : • When restriction is overridden, the setting
conforms to the content of each toll restriction
class.
• See MODE 7 “Program settings for each service
type Table”.
(10-25)1x#-(0, 1-4)#
C
DAY RESTRICTION TYPES EXCHANGE
LINE 1-4
Sets which type fall under for day mode.
0#: Type 0 (Intercom calls only)
1#: Type 1 (Incoming calls only)
2#: Type 2 (Local calls only)
3#: Type 3 (Long distance calls, restricted by area)
4#: Type 4 (No restrictions)
NOTE : See MODE 7 “Program settings for each service
type Table”.
(10-25)2x#-(0, 1-4)#
C
NIGHT RESTRICTION TYPES EX-
CHANGE LINE 1-4
Sets which type fall under for night mode.
0#: Type 0 (Intercom calls only)
1#: Type 1 (Incoming calls only)
2#: Type 2 (Local calls only)
3#: Type 3 (Long distance calls, restricted by area)
4#: Type 4 (No restrictions)
NOTE : See MODE 7 “Program settings for each service
type Table”.
70nn#-(0 or 1)#
C
2-DIGIT RESTRICTION (VALID FOR
RESTRICTION TYPES 1, 2)
Dialing is restricted if the maximum 2-digit number (00
to 99) set here matches the number at start of dialing.
In the initial setting (1#), prohibiting 00-09 allows you
to prohibit trunk transmissions in restriction types 1 and
2.
0#: Not restricted (10-99)
1#: Restricted (00-09)
(01-16: Data No.)
(10-25: Extension No.,
x=1-4: Exchange line
No.)
(10-25: Extension No.,
x=1-4: Exchange line
No.)
(nn=00-99: 2-digit number
to be restricted)
