P-60
PROGRAMMING (MODE 10)
212m#-(0 to 2)#
SETTING THE OPTIONAL FEATURES
(NCC2)
The user can select to have a call serial number or
extension number shown for each call on the itemized
NCC2 bill.
Select either facility if desired for each authorization
code.
0#: Not used
1#: Call Serial No.
2#: Internal Itemized Bill (Extension No.)
213m#-(0 to 2)#
SETTING THE OPTIONAL FEATURES
(NCC3)
The user can select to have a call serial number or
extension number shown for each call on the itemized
NCC3 bill.
Select either facility if desired for each authorization
code.
0#: Not used
1#: Call Serial No.
2#: Internal Itemized Bill (Extension No.)
214m#-(0 to 2)#
SETTING THE OPTIONAL FEATURES
(NCC4)
The user can select to have a call serial number or
extension number shown for each call on the itemized
NCC4 bill.
Select either facility if desired for each authorization
code.
0#: Not used
1#: Call Serial No.
2#: Internal Itemized Bill (Extension No.)
221(1-4)#-m#
SELECTION OF AUTHORIZATION
CODE FOR EACH EXCHANGE LINE TO
USE LCR FEATURE (NCC1)
The authorization code must be assigned to each
exchange line to use the LCR feature.
Change programme as desired by inputting authoriza-
tion code number (1-8).
(1-4: Exchange line No.
m=0: Disable use of LCR feature
m=1-8: Authorization code type)
222(1-4)#-m#
SELECTION OF AUTHORIZATION
CODE FOR EACH EXCHANGE LINE TO
USE LCR FEATURE (NCC2)
The authorization code must be assigned to each
exchange line to use the LCR feature. Change
programme as desired by inputting authorization code
number (1-8).
223(1-4)#-m#
SELECTION OF AUTHORIZATION
CODE FOR EACH EXCHANGE LINE TO
USE LCR FEATURE (NCC3)
The authorization code must be assigned to each
exchange line to use the LCR feature. Change
programme as desired by inputting authorization code
number (1-8).
224(1-4)#-m#
SELECTION OF AUTHORIZATION
CODE FOR EACH EXCHANGE LINE TO
USE LCR FEATURE (NCC4)
The authorization code must be assigned to each
exchange line to use the LCR feature. Change
programme as desired by inputting authorization code
number (1-8).
3000#-(Max.16 digit BT Access code)#
BT ACCESS CODE
Current BT access code 121 is stored by default pro-
gramming. Programming can be changed if access code
is changed.
BT access code: 121
3001#-(Max.16 digit NCC1 Access code)#
NCC1 ACCESS CODE
Current MCL access code 131 is stored by default
programming. This programme can be
changed if NCC1 assigns a new access code.
MCL access code: 131
(1-4: Exchange line No.
m=0: Disable use of LCR feature
m=1-8: Authorization code type)
(1-4: Exchange line No.
m=0: Disable use of LCR feature
m=1-8: Authorization code type)
(1-4: Exchange line No.
m=0: Disable use of LCR feature
m=1-8: Authorization code type)
(m=1-8: Authorization code
type)
(m=1-8: Authorization code
type)
(m=1-8: Authorization code
type)
