Troubleshooting
Oth
er
s
109
LSQT1048
Problem
Check points
Recorded still pictures
are not clear.
≥
Are you trying to record small or finely detailed objects
with [PICT. QUALITY] set at [
]?
#
If you try to record small or finely detailed objects with
[PICT. QUALITY] set at [
], the images may break up into
a mosaic-like pattern. Record with [PICT. QUALITY] set at
[
] instead. (
l
43)
The images on the SD
card do not look normal.
≥
The data may be destroyed. It may have been destroyed by
static or electromagnetic waves. Store important data on a
computer or other products as well.
Even if a disc or a card is
formatted, it cannot be
used.
≥
Either this unit or the disc or card may be damaged. Please
consult a dealer.
The indication
disappears.
The screen is frozen.
No operation can be
performed.
≥
Turn off the power to this unit. If the power cannot be
turned off, press the RESET button, or remove the battery
or AC adaptor and then reattach it. After that, turn on the
power again. If normal operation is still not restored,
detach the power connected, and consult the dealer who
you purchased this unit from.
“PUSH THE RESET
SWITCH.” is displayed.
≥
The unit has automatically detected an
error. Press the RESET button with the
projecting part of the lens cap. This will
restart the unit.
≥
If you do not press the RESET button,
the power to this unit is turned off
automatically about 1 minute later.
≥
Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and consult the dealer who you
purchased this unit from. Do not attempt to repair the
appliance by yourself.
LSQT1048(ENG).book 109 ページ ２００６年２月６日 月曜日 午後２時１３分
