Se
tup
Setting date and time
35
LSQT1048
Setting date and time
If the screen shows the incorrect date/time, then adjust it.
¬
Rotate the mode dial to select
or
.
1 Press the MENU button, then select [
BASIC]
#
[
CLOCK SET]
#
[YES] and press the joystick.
2 Move the joystick left or right to select the item to be
set. Then, move the joystick up or down to set the
desired value.
≥
The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥
The 24-hour system is used to display the time.
3 Press the joystick to enter the selection.
≥
After pressing the MENU button to finish the setting, check the date and time display.
≥
The clock function starts at [00] seconds.
LSQT1048(ENG).book 35 ページ ２００６年２月６日 月曜日 午後２時１３分
