Editi
n
g
Editing still pictures (VDR-D150 only)
81
LSQT1048
¬
Rotate the mode dial to select
.
1 Press the MENU button, then select [ DELETE]
#
[ SELECT] or [
ALL] and press the joystick.
≥
When [ALL] is selected, all files on the SD card except the locked files
will be erased. Proceed to step 4.
2
(Only when [SELECT] is selected in step 1)
Select the file to be deleted, then press the joystick.
The selected file is encircled by a yellow frame.
≥
When the joystick is pressed again, the selected file will be cancelled.
≥
Up to 8 files displayed on a page can be set in succession.
3
(Only when [SELECT] is selected in step 1)
Press the button.
4 When the confirmation message appears, select [YES], then press the
joystick.
(Only when [SELECT] is selected in step 1)
To continue deleting other files
Repeat steps 2-4.
To complete editing
Press the MENU button.
∫
Deleting still picture files recorded on an SD card by other products
A still picture file (other than JPEG) that cannot be played back on this unit may be erased.
≥
In case of [ALL], the deletion may take time if there
are many files on the SD card.
≥
Do not turn off this unit while deleting.
≥
When you delete files, use a battery with sufficient
battery power or use the AC adaptor.
≥
Do not remove the SD card while deleting.
≥
If files conforming to DCF standard are deleted, all
the data related to the files will be deleted.
Deleting multiple files from the thumbnail display
LSQT1048(ENG).book 81 ページ ２００６年２月６日 月曜日 午後２時１３分
