36
LSQT1156
Setup
≥
Use the direction buttons
(
3
,
4
,
2
,
1
) and
ENTER button in place of the joystick on the
main unit.
3
Press the MENU button to exit
the menu screen.
Setting date and time
When the unit is turned on for the first time, a
message asking you to set the date and time will
appear.
≥
Select [YES] and press the joystick. Perform
steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time,
then adjust it.
¬
Rotate the mode dial to select
or
.
1
Press the MENU button, then
select [BASIC]
#
[CLOCK SET]
#
[YES] and press the joystick.
2
Move the joystick left or right to
select the item to be set. Then,
move the joystick up or down to
set the desired value.
≥
The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥
The 24-hour system is used to display the time.
3
Press the joystick to enter the
selection.
≥
The clock function starts at [00] seconds when
the joystick is pressed.
≥
After pressing the MENU button to finish the
setting, check the date and time display.
∫
Changing the date and time display style
Press the MENU button, then select [SETUP]
#
[DATE/TIME]
#
desired display style and
press the joystick.
≥
You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
(VDR-D310)
∫
Changing the display style
Press the MENU button, then select [SETUP]
#
[DATE FORMAT]
#
desired display style
and press the joystick.
MENU
ENTER
MENU
[DATE]
[D/T]
[OFF]
Display style
Screen display
[Y/M/D]
2007.12.15
[M/D/Y]
12.15.2007
[D/M/Y]
15.12.2007
15.12.2007 15:30
15.12.2007
LSQT1156_EN.book 36 ページ ２００６年１２月７日 木曜日 午後７時５３分
