6.2. Service Menu
When abnormal detection contents are confirmed a When I do the following operation automatic diagnosis code is
displayed.
1. Preparation
(1) Remove the card and disc from this unit.
2. To enter the Service Menu. (see Fig. S1)
(1) Turn on power and set the Mode Dial to [DISC PLAYBACK MODE].
(2) Pushed [DELETE] button, [JOYSTICK CONTROL LEFT] button and [RECORDING START/STOP] button simmultaneously
for 3 seconds.
3. To select the Item.
(1) Press the [JOYSTICK CONTROL UP/DOWN] to select item [2] or [5].
(2) Press the [JOYSTICK CONTROL RIGHT] to display [YES/NO] screen.
(3) Press the [JOYSTICK CONTROL UP/DOWN] to select [YES].
(4) Press the [JOYSTICK CONTROL CENTER].
4. To exit the Service Menu.
(1) Unplug the AC Cord.
Fig. S1
NOTE:
Do not operate items except for [2] and [5] in the Service Menu.
Self diagnosis code contents are as follows.
<Item 2>
24
VDR-D300EG / VDR-D300E / VDR-D300EB / VDR-D300EP / VDR-D300EE / VDR-D300GC / VDR-D300GN / VDR-D300SG / VDR-D300GCS / VDR-D308GK
