29
LSQT1161
Setup
3
Insert/remove the SD card into/
from the card slot.
≥
When inserting an SD card, face the label side
A
upwards and press it straight in as far as it
goes.
≥
When removing the SD card, press the centre
of the SD card and then pull it straight out.
4
Securely close the card slot
cover.
∫
Concerning the SD card
≥
Electrical noise, static electricity or failure of
this unit or the SD card may damage or erase
the data stored on the SD card. We
recommend saving important data on a
computer.
∫
Card access lamp
≥
When this unit accesses the SD card (reading,
recording, playback, erasing, etc.), the access
lamp lights up.
≥
If the following operations are performed when
the access lamp is lit, then the SD card or the
recorded data may be damaged or this unit
may malfunction.
s
Removing the SD card
s
Operating the OFF/ON switch or the mode
dial
s
Removing the battery or disconnecting
the AC adaptor
Selecting a mode
The mode dial is used to switch between
recording and playback modes.
Rotate the mode dial slowly but surely.
Rotate the mode dial, and set the
desired mode pictograph to the
position shown in the illustration.
≥
Do not forcefully rotate the dial.
How to use the joystick
This unit has a joystick for selecting functions,
performing operations, etc. so it is easy to
operate this unit with one hand.
Operations on the menu screen and selection of
files on the thumbnail view screen, etc.
A
Video recording mode (
l
39)
Use this to record motion pictures on a
disc.
Video playback mode (
l
57)
Use this to play back motion pictures on
a disc.
Picture recording mode (
l
42)
Use this to record still pictures on an
SD card.
Picture playback mode (
l
61)
Use this to play back still pictures on an
SD card.
Basic operations
LSQT1161_GN.book 29 ページ 2007年1月19日 金曜日 午後1時8分