51
LSQT1319
The automatic white balance function may not
reproduce natural colors depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
1
Select the manual mode. (
l
49)
2
Select [
] with the joystick.
3
Select the white balance mode
with the joystick.
To restore to the automatic adjustment
Set the white balance mode to [
].
≥
You can also restore the automatic adjustment
by pressing the AUTO button.
1
Select [
] with the joystick, and
fill the screen with a white
subject.
2
Select [
] with the joystick.
When the [
] display stops flashing, the setting
is complete.
≥
If the [
] display continues flashing, the white
balance cannot be set because it is too dark. In
this case, use the automatic white balance.
∫
White balance sensor
A
The white balance sensor detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
≥
When the unit is turned on with the lens cover
closed, the automatic white balance
adjustment may not function properly. Please
turn the unit on after opening the lens cover.
≥
When the [
] display flashes, the manual
white balance previously adjusted is stored.
White balance
Icon
Mode/Recording conditions
Auto white balance adjustment
Indoor mode (for recording under
incandescent lamps)
Incandescent lights, halogen lamps
Outdoor mode
Outdoors under a clear sky
Manual adjustment mode
≥
Mercury-vapor lamps, sodium
lamps, some fluorescent lights
≥
Lights used for wedding receptions
at hotels, stage spotlights in
theaters
≥
Sunrise, sunset, etc.
MNL
3/3
3/3 NEXT
NEXT
3/3 NEXT
MNL
BACK
BACK
BACK
AWB
AWB
To set the white balance manually
MNL
BACK
BACK
BACK
BACK
MNL
BACK
BACK
BACK
A
VDR-D50P&PC-LSQT1319_eng.book 51 ページ ２００７年１１月１４日 水曜日 午後５時２１分
