4 - 4
4-2-2 System reset procedure
1) Set the power switch to “POWER OFF”, and then disconnect
the battery or AC adapter/charger.
2) Use a fine tipped pen, etc. to hold down the RESET button for
approx. 2 seconds.
4-2-3 Procedure for resetting camera functions
1) Connect the battery or AC adapter/charger to power the VDR-M30.
2) Set the power switch to “VIDEO” and place the VDR-M30 in the recording pause status; loading
disc is not necessary at this time. For the following steps, operate VDR-M30 while viewing the
LCD monitor or viewfinder.
3) Press the MENU button to display the camera setting menu screen.
4) Use the joystick to choose “Initial Setup”, and then press the playback/pause button (press the
center of joystick).
5) Use the joystick to choose “Reset”, and then press the playback/pause button: The screen for
verifying reset will appear.
6) Use the joystick to choose “YES”, and then press the playback/pause button: Reset will be
executed.
7) After reset, press the MENU button to close the camera setting menu.
Fig. 4-2-1 System Reset
RESET Button
Troubleshooting > System Resetting/Resetting Camera Functions
