background image

59

12

Skip Playback of Movie

During playback, press the following buttons to 
locate the start of desired scene.
Press the 

e

 button: To skip to the first image of 

the scene following the one 
being played back, and start 
playback.

Press the 

f

  button: To return to the first image of 

the scene being played back, 
and start playback.

Hold the 

e

 button: To continuously locate the 

beginnings of scenes, 
starting from the scene 
following the scene being 
played back. When the 
desired image appears, 
release the 

e

 button: 

Playback will start from that 
point.

Hold the 

f

 button: To continuously locate the 

beginnings of scenes 
backward, starting from the 
scene preceding the scene 
currently being played back. 
When the desired image 
appears, release the 

f

 

button: playback will start 
from that point.

Note

:

If you perform skip playback during playback pause, the 
DVD Video Camera will enter the playback pause status 
at the beginning of the located scene.

Pressing the 

e

 button in the last scene on disc will set 

the DVD Video Camera to playback pause mode at the 
last image.

See “Check 3” on page 139 if skip playback does not 
operate normally.

13

Playing Back Stills

Press the following buttons during playback to 
quickly play back stills in sequence.
Press the 

e

 button: to display stills one by one 

forward

Press the 

f

 button: to display stills one by one 

backward

[When using disc]

Releasing the control buttons will start continuous 
playback.

[When using card]

When the control button is released, the photo at 
that point will be displayed, and then the DVD Video 
Camera will enter playback pause mode.
Set the slide show function for continuous display 
(P. 122).

Portion being played back

Press the 

f

 

button twice

Press the 

f

 

button once

Press the 

e

 

button once

Press the 

e

 

button twice

Press the 

f

 

button once

Press the 

e

 

button once

Press the 

e

 

button twice

Scene 1

Scene 2

Scene 3

Scene 1

Scene 2

Scene 3

Portion being played back

Pressing the 

f

 button at a point several seconds 

from the start of scene being played back will return to 
the start of the scene preceding that being played 
back.

VDR-M75M55EB.book  Page 59  Tuesday, May 17, 2005  10:32 AM

Summary of Contents for VDR-M55EB





































































































































































Reviews: