77
Using the Image Stabiliser (SIS)
When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image.
1
Press the MENU button,
choose “SIS” on the
“Camera Functions
Setup” menu screen, and
then press the
A
button.
2
Choose the “On” or “Off”, and then press the
A
button.
3
Press the MENU button to end the setting.
z
Checking SIS On or Off
You can check SIS On or Off by the on-screen
information display.
After recording with SIS set to “Off”, it is
recommended that you return the setting to “On”
and then turn the DVD Video Camera off, unless
you normally record with “Off” setting.
This function is effective only during movie
recording: It will not work during still recording.
Note
:
•
The SIS setting will be stored in memory even when the
DVD Video Camera is turned off.
•
It is recommended that you specify “SIS:Off” when using
the DVD Video Camera on a desk or tripod.
•
When “SIS:On” is specified, there will be a slight
difference between the actual movement and the
movement on screen.
•
Gross camera shake may not be entirely corrected even
if “SIS:On” is specified.
•
When you record pictures with 24x or more magnification
and the SIS is “On” in dim places, after-images may stand
out. In this case, we recommend using a tripod and
turning the SIS to “Off” (only for VDR-M55EB).
•
The SIS function cannot be used when still images are
recorded (only for VDR-M75EB).
•
The SIS function will work only during movie recording
(only for VDR-M75EB).
Reducing Wind Noise during Recording (Wind Cut)
When recording sound from the microphone built into this DVD Video Camera, you can reduce wind noise
in recording.
If “Wind Cut: ON” is specified, the low-frequency components in the sound picked up by the microphone
will be cut off during recording: This makes it easier to hear the target voice or sound during playback.
1
Press the MENU button,
choose “Wind Cut” on the
“Camera Functions
Setup” menu screen, and
then press the
A
button.
2
Choose “On”, and then press the
A
button.
3
Press the MENU button to
end the setting.
Note
:
•
You can also use the on-screen display to confirm that
the Wind Cut has been set.
•
The Wind Cut setting will be stored in memory even when
the DVD Video Camera is turned off.
•
The Wind Cut function will work only during movie
recording.
•
The Wind Cut function works only with the built-in
microphone. It will not function when using an external
microphone (P. 66).
Came r a F u n c t i on s S e t u p
P r o g r am AE
Wh i t e Ba l .
D i g . Z o om
S I S
O f f
On
ENTER
RETURN
RAM
Wi n d Cu t
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
8 : 0 0 AM
S E P 3 0 2 0 0 5
SIS
Cam e r a F u n c t i o n s S e t u p
RAM
P r o g r am AE
Wh i t e Ba l .
D i g . Z o om
Wi n d C u t
S I S
ENTER
RETURN
O f f
On
3 0 MIN
0 : 0 0 : 0 0
REM
FINE
8 : 0 0 A M
S E P 3 0 2 0 0 5
Wind Cut icon
VDR-M75M55EB.book Page 77 Tuesday, May 17, 2005 10:32 AM
