background image

accordance with the manufacturer’s instructions.

8)   Do not install near any heat sources such as 

radiators, heat registers, stoves or other apparatus 
(including amplifiers) that produce heat.

9)   Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The 
wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your 
outlet, consult an electrician for replacement of the 
obsolete outlet.

10)  Protect the power cord from being walked on 

or pinched particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus.

11)  Only use attachments / accessories specified by the 

manufacturer.

12)  Use only with the cart, stand, 

tripod, bracket or table specified by 
the manufacturer, or sold with the 
apparatus. When a cart is used, 
use caution when moving the cart / 
apparatus combination to avoid 
injury from tip-over.

13)  Unplug this apparatus during lightning storms or 

when unused for long periods of time.

14)  Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.

15)  Operate only from the type of power source indicated 

on the marking label. If you are not sure of the 
type of power supplied to your home, consult your 
television dealer or local power company.

16)  Follow all warnings and instructions marked on the 

TV.

17)  Never push objects of any kind into this TV through 

cabinet slots as they may touch dangerous voltage 
points or short out parts that could result in a fire or 
electric shock. Never spill liquid of any kind on the 
TV.

18)  If an outside antenna is connected to the television 

equipment, be sure the antenna system is 
grounded so as to provide some protection against 
voltage surges and built up static charges. In the 
U.S. Section 810-21 of the National Electrical 
Code provides information with respect to proper 
grounding of the mast and supporting structure, 
grounding of the lead-in wire to an antenna 
discharge unit, size of grounding conductors, 
location of antenna discharge unit, connection to 
grounding electrodes, and requirements for the 
grounding electrode.

Safety Precautions

CAUTION

RISK OF ELECTRIC 
SHOCK 
DO NOT OPEN

WARNING: To reduce the risk of electric shock, 
do not remove cover or back. No user-serviceable 
parts inside. Refer servicing to qualified service 
personnel.

The lightning flash with arrowhead within a 
triangle is intended to tell the user that parts 
inside the product are a risk of electric shock 
to persons.

The exclamation point within a triangle 
is intended to tell the user that important 
operating and servicing instructions are in the 
papers with the appliance.

Note to CATV System Installer

This reminder is provided to direct the CATV system 
installer’s attention to Article 820-40 of the NEC that 
provides guidelines for proper grounding and, in 
particular, specifies that the cable ground shall be 
connected to the grounding system of the building, as 
close to the point of cable entry as practical.

Secure Ventilation

Slots and openings in the cabinet and the back or 
bottom are provided for ventilation, and to ensure 
reliable operation of the TV and to protect it from 
overheating. These openings must not be blocked 
or covered. There should be at least 10 cm of space 
around the TV. The openings should never be blocked 
by placing the TV on a bed, sofa, rug or other similar 
surface. This TV should not be placed in a built-in 
installation such as a bookcase unless proper ventilation 
is provided.



10 cm

Important Safety Instructions (TV set)

1)   Read these instructions.
2)   Keep these instructions.
3)   Heed all warnings.
4)   Follow all instructions.
5)   Do not use this apparatus near water.
6)   Clean only with dry cloth.
7)   Do not block any ventilation openings. Install in 

4

English

Summary of Contents for Viera TC-43DS630C
























Reviews: