- 102 -
●
Audio system:
Maximum 1 (Player theatre, Blu-ray Disc theatre, Amplifier, etc.)
●
Tuner:
Maximum 4 (Set top box, etc.)
Preparations
●
Connect the equipment supporting VIERA Link.
●
For VIERA Link connections
Functions VIERA Link “HDAVI Control™” Summary of VIERA Link
●
Use a fully wired HDMI compliant cable. Non-HDMI-compliant cables
cannot be used.
●
Set up the connected equipment. Read the manual of the equipment.
●
Set
VIERA Link
to
On
in the Setup Menu.
Settings Setup VIERA Link Settings
●
Set up the TV. After connection, turn the equipment on and then switch the
TV on. Select the HDMI input from
Input Selection
with
AV
and make sure
that an image is displayed correctly. (This setup should be done each time
the following conditions occur.)
– first time operation
– adding or reconnecting equipment
– changing setup
Easy playback
Automatic input switching - When the connected equipment is operating, the
input mode is switched automatically.
Power on Link
Set
Power on Link
to
On
in the Setup Menu to use this function.
Settings Setup VIERA Link Settings
When the connected equipment starts playback, the TV is automatically
turned on. (Only when the TV is in Standby mode.)
Power off Link
Set
Power off Link
to
On
in the Setup Menu to use this function.
Settings Setup VIERA Link Settings
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
●
This function will work even if the TV enters Standby mode automatically
by auto power standby function.
