Connecting the TV
6
Connecting the TV
●
Please ensure the TV is disconnected from the mains
socket / power point before attaching or disconnecting
any RF / AV leads.
●
External equipment and cables are for illustrative
purposes only and not supplied with this TV.
●
Check the type of terminals and cable plugs are
correct when connecting.
●
When using an HDMI cable, use the fully wired one.
●
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or
operation of other equipment may be interfered.
●
Also read the manual of the equipment being
connected.
Terminals
Rear of the TV
2
1
4
3
5
1
HDMI 1 - 2
2
AV IN
3
Aerial terminal
4
DIGITAL AUDIO OUT
5
USB port
Connections
Aerial and mains lead
RF cable
Mains lead
(supplied)
Aerial
Insert the mains plug firmly into
place.
●
When disconnecting the mains
lead, be absolutely sure to
disconnect the mains plug at the
socket outlet first.
●
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
●
An aerial, correct cable (75
coaxial) and correct
terminating plug are required to obtain optimum quality
picture and sound.
●
If a communal aerial system is used, you may require
the correct connection cable and plug between the wall
aerial socket and the TV.
●
Your local Television Service Centre or dealer may be
able to assist you in obtaining the correct aerial system
for your particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
●
If the aerial is placed in the wrong location, interference
might happen.
DV
TV
Set
TV
AV
■
Us
TV
●
You
■
Us
TV
■
Us
TV
TH-24C400Z_EN.indd 6
TH-24C400Z_EN.indd 6
13-Feb-15 2:01:18 PM
13-Feb-15 2:01:18 PM
