39
Advanced
Menu
Item
Adjustments / Configurations (options)
Picture
Advanced
PC
Settings
W/B High R
White balance of bright red area
and
repeatedly adjusted
W/B High B
White balance of bright blue area
W/B Low R
White balance of dark red area
W/B Low B
White balance of dark blue area
Gamma
(S Curve / 2.0 / 2.2 / 2.5)
Reset to
Default
Press the OK button to reset to the default Picture settings
Setup
PC
Setup
Input
Resolution
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
•
Options change depending on signals
Clock
Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates
fl
icker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
Sync
Chooses another synchronous signal if the image is distorted
(H & V / On G)
•
H & V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
Reset to
Default
Press the OK button to reset to the default Setup settings
•
Other items p. 26 and p. 27
OPTION SD CARD
EXIT
RETURN
INPUT
Input Selection
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI3
HDMI2
TV
■
To return to TV
Displaying PC Screen on TV
Select the external input
Select “PC”
2
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
•
To connect PC p. 50
•
Corresponding signals p. 54
•
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
■
PC menu setting
(changed as desired)
•
To make settings “How to Use Menu Functions”
to
(p. 24)
•
Displaying PC Screen on
TV
•
Input Labels
1
access
select
