Initial Setup
8
Initial Setup
When you first turn on the TV, a series of steps will pop-
up to guide you to setup your TV.
●
These steps are not necessary if the setup has been
completed by your local dealer.
1
Plug the mains plug into the mains
socket and turn on the TV.
It may take a few seconds before the screen is
displayed.
AC 220 - 240 V,
50 / 60 Hz
2
Select your language.
3
Select your area.
Channel Plan
Asia/W.Europe
NZ/Indonesia
China
CIS/E.Europe
CATV/Other
Hong Kong
OK
Start Auto Setup
Select
4
Scanning starts.
Auto Tuning
Status: Scanning...
Analogue : 0
Digital : 1
EXIT
RETURN
Scan
5%
●
This function searches and stores TV channels.
●
The stored channels and sorted channel order vary
depending on the area, broadcasting system and
conditions of signal reception.
5
Select [Home].
Please select your viewing environment.
Home
Shop
OK
Confirm
Change
●
[Shop] is for shop display.
●
To change the viewing environment later on, you
need to initialise all settings by accessing [Shipping
Condition]
(p. 16).
Setup is now complete and your TV is ready for
viewing.
Note
●
If tuning has failed, check the connection of the
RF cable, then follow the on-screen instructions.
Others
TH-40F400H.indd 8
TH-40F400H.indd 8
2/20/2018 2:16:26 PM
2/20/2018 2:16:26 PM