background image

50

51

FAQs, etc.

 Customer Services Directory (for U.S.A.)

 Limited W

arranty (for U.S.A.)

Limited Warranty Coverage

If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer 

Electronics Company or Panasonic Puerto Rico, Inc. (collectively referred to as “the warrantor”) will, for the length of 

the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), 

at its option either (a) repair your product with new or refurbished parts, or (b) replace it with a new or a refurbished 

product. The decision to repair or replace will be made by the warrantor.

During the “Labor” Limited Warranty period there will be no charge for labor. During the “Parts” Limited Warranty 

period, there will be no charge for parts.

You must carry-in your product or arrange for in-home service during the Limited Warranty period. If non-

rechargeable batteries are included, they are not warranted. This Limited Warranty only applies to products 

purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original 

purchaser and only covers product purchased as new. A purchase receipt or other proof of the original purchase date 

is required for Limited Warranty service.

In-Home or Carry-in Service

For In-Home or Carry-In Service in the United States call 1-888-VIEW-PTV(1-888-843-9788).

For assistance in Puerto Rico call Panasonic Puerto Rico, Inc. (787)-750-4300 or fax (787)-768-2910.
In-Home service requires clear, complete and easy access to the product by the authorized servicer and does 

not include removal or re-installation of an installed product. It is possible that certain in-home repairs will not be 

completed in-home, but will require that the product, or parts of the product, be removed for shop diagnosis and/or 

repair and then returned.

Limited Warranty Limits And Exclusions

This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER 

normal wear and tear or cosmetic damage, nor does it cover markings or retained images on the picture tube 

resulting from viewing fixed images (including, among other things, letterbox pictures on standard 4:3 screen TV’s, 

or non-expanded standard 4:3 pictures on wide screen TV’s, or onscreen data in a stationary and fixed location). 

The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused 

by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, bug 

infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer 

controls, improper maintenance, power line surge, lightning damage, modification, or commercial use (such as in a 

hotel, office, restaurant, or other business), rental use of the product, service by anyone other than a Factory Service 

Center or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER “LIMITED WARRANTY COVERAGE”. 

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM 

THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY.

 (As 

examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if 

applicable, or travel to and from the servicer. The items listed are not exclusive, but are for illustration only.) 

ALL 

EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE LIMITED WARRANTY OF MERCHANTABILITY, ARE 

LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how 

long an implied Limited Warranty lasts, so the exclusions may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have others rights which vary from state 

to state. If a problem with this product develops during or after the Limited Warranty period, you may contact your 

dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer 

Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE (INCLUDING COST OF AN IN-HOME SERVICE CALL, WHERE APPLICABLE) WHICH 

ARE NOT COVERED BY THIS LIMITED WARRANTY ARE YOUR RESPONSIBILITY.

Limited Warranty 

(for U.S.A.)

Panasonic Color Television

Limited Warranty

CATEGORIES

ALL PARTS EXCEPT

GLASS PANEL OR CRT

LABOR

GLASS PANEL OR CRT

GLASS PANEL 

OR

CRT LABOR

SERVICE

PLASMA DISPLAY

1 (ONE) YEAR

1 (ONE) YEAR

GLASS PANEL - 2 (TWO) 

YEARS

1 (ONE) YEAR

IN-HOME OR CARRY-IN

PANASONIC CONSUMER ELECTRONICS COMPANY,

DIVISION OF

PANASONIC CORPORATION OF NORTH AMERICA

One Panasonic Way

Secaucus, New Jersey 07094

PANASONIC SALES COMPANY,

DIVISION OF

PANASONIC PUERTO RICO, INC.

Ave. 65 de Infanteria, Km. 9.5

San Gabriel Industrial Park

Carolina, Puerto Rico 00985

Customer Services Directory 

(for U.S.A.)

Customer Services Directory

Accessory Purchases

Service in Puerto Rico

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; 
purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web 
Site at:

http://www.panasonic.com/consumersupport

or, contact us via the web at:

http://www.panasonic.com/contactinfo

You may also contact us directly at:
1-888-VIEW-PTV (843-9788)
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.

 

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Purchase Parts, Accessories and Instruction Books on line for all Panasonic Products by visiting our Web 
Site at:

http://www.pstc.panasonic.com

or, send your request by E-mail to: 

npcparts@us.panasonic.com

You may also contact us directly at: 
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 8 pm, EST.)
Panasonic Service and Technology Company
20421 84th Avenue South,
Kent, WA 98032
(We Accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)

 

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

Panasonic Puerto Rico, Inc.

Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,

Carolina, Puerto Rico 00985

Phone (787)750-4300, Fax (787)768-2910

Summary of Contents for Viera TH-42PX75























































Reviews: