Panasonic Viera TH-65EZ1000U, Operating Instructions Manual

English

20

 2  Ambient sensor

● 

 Senses brightness to adjust picture quality when 
[Ambient Sensor] in the Picture Menu is set to 
[On].

 3   Power LED

Red:

 Standby

Green:

 On

Orange:

  Standby with some functions (recording, 

etc.) active or panel maintenance in 
progress

● 

 The LED blinks when the TV receives a command 
from the remote control.

 4  Input mode selection

● 

 Press repeatedly until you reach the desired mode.

 [Main Menu]

● 

 Press and hold for about 3 seconds to display main 
menu.

OK

 (when in the menu system)

 5  Channel Up / Down

● 

 Cursor Up / Down (when in the menu system)

 6  Volume Up / Down

● 

 Cursor Left / Right (when in the menu system)

  7  Mains power On / Off switch

● 

 Use to switch the mains power.

● 

 To turn Off the apparatus completely, you must pull 
the mains plug out of the mains socket.

● 

 [

]:  Standby / On

  Panel maintenance

 Be sure to turn the TV off with the remote control to 
perform the panel maintenance. During the panel 
maintenance, LED turns to orange.
 During panel maintenance, avoid touching and exerting 
any pressure on the screen. (e.g. wiping the screen, 
etc.)
 There are two types of the maintenance as following.
    Normal maintenance automatically starts, and it takes 

approx. 10 minutes.

    Regular maintenance takes approx. 80 minutes.

•

 When regular maintenance is necessary, the 
message appears on the screen after turning the 
TV off with the remote control. Follow the on-
screen instructions.

•

 During the panel maintenance, a white horizontal 
line appears on the screen for a while. This is not 
a malfunction.

● 

 For information about panel maintenance, refer to 
[eHELP] (Search by Purpose > Watching > For best 
picture > Screen Settings)

■

  Installing / Removing batteries

 Slide open

 Note the correct polarity 

(+ or -)

 Close

 Note

● 

 It is recommended to hold Touch Pad Controller with 
your hand when using.

● 

 The battery power will be used whenever you use 
Touch Pad Controller (including the touch of the touch 
pad) even if not operating the TV. It may decrease the 
battery life.

● 

 Some operations differ depending on the application.

  Indicator / Control panel

● 

 When pressing 4, 5, 6 buttons, the control panel 
guide appears on the right side of the screen for 
3 seconds to highlight which button has been 
pressed.

1

2 3

5

6

7

4

 Rear side of the TV

 1  Remote control signal receiver

● 

 Do not place any objects between the TV remote 
control signal receiver and remote control.