Identifying Controls
10
Indicator / Control panel
Using the On Screen Displays
- Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■
Operation guide
Operation guide will help you to operate by using
the remote control.
Example: [Sound Menu]
Sound Menu
Mode
Music
Off
Off
Mono
Over 30cm
Bass
0
0
Treble
Balance
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
MPX
1/2
0
0
Select
EXIT
Page up
Change
RETURN
Page down
Operation guide
■
How to use remote control
MENU
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
Access the menu / store settings after adjustments
have been made or options have been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal
viewing screen
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
•
No signal is received and no operation is performed for 30 minutes in Analogue TV mode.
•
[Off Timer] is active in the Setup Menu. (p. 15)
•
No operation is performed for the period selected in [Auto Standby] (p. 29).
1
Function select
●
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass]
/
[Treble]
/ [Balance] / [Digital TV Auto Tuning] /
[Analogue TV Auto Tuning]
[Music] or [Speech] mode in the Sound Menu
2
Channel Up / Down, Value change (when using the
F button), Switching the TV on
3
Changes the input mode
4
Mains power On / Off switch
●
Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
●
When pressing the control panel button (1 - 4), the
control panel guide appears on the right side of the
screen for 3 seconds to highlight the pressed button.
5
Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
6
C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 25)
7
Power LED
Red:
Standby
Green:
On
●
The LED blinks when the TV receives a command
from the remote control.
B
E
P
Rear side of the TV
5
6
7
3
1
4
2
TH-L32XM5Z.indb 10
TH-L32XM5Z.indb 10
7/3/2012 6:35:05 PM
7/3/2012 6:35:05 PM