How to Use the Menu Functions
39
MPX
• Stereo
• Mono
• M1
• M2
Selects multiplex sound mode (if available)
[Stereo]
: Use this normally
[Mono]
: When stereo signal cannot be received
[M1]
/
[M2]
: Available while mono signal is transmitted
•
Analogue TV mode only
Digital Audio Preference
• Dolby D
• HE-AAC
Selects the initial setting for audio tracks
[Dolby D]:
The priority is given in the following order - Dolby Digital,
HE-AAC, MPEG1.
[HE-AAC]:
The priority is given in the following order - HE-AAC, MPEG1,
Dolby Digital.
•
Dolby Digital is the method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2ch) audio, these signals can be
multi-channel audio.
•
HE-AAC is a perceptual coding method used to compress digital audio
for efficient storage and transmission.
•
MPEG1/Layer-2 is an audio compression method that compresses
audio to the smaller size without any considerable loss of audio quality.
•
Digital TV mode only
SPDIF Selection
• Auto
• PCM
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL
AUDIO OUT terminal
[Auto]:
Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz)
multi-channel are output as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM]:
Digital output signal is fixed to PCM.
•
For Digital TV mode, Video mode (p. 62) or Network video contents (p. 77)
HDMI1 / 2 / 3 / 4 Input
• Digital
• Analogue
Selects to fit the input signal (p. 88)
[Digital]:
HDMI cable connection
[Analogue]:
HDMI-DVI adaptor cable connection
•
HDMI input mode only
Audio Description
• Off
• Auto
Useful for visually-impaired viewers
Set to [Auto] to activate the description sound track if available
•
The availability of audio description sound track is indicated by [AD] in
the information banner (p. 19).
•
Digital TV mode only
Reset Sound Defaults
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
Timer
Item
Adjustments / Configurations (alternatives)
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Sets the time until the TV automatically goes into Standby mode
Auto Standby
• Off
• 2 / 4 hours
Sets the time the TV automatically goes into Standby mode when no
operation is performed for the selected times
•
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
•
The notification message will appear 3 minutes before going into Standby mode.
Summary of Contents for Viera TH-P42ST30Z
Page 99: ...99 MEMO ...