22
Do not apply pressure to or scratch
●
the surface of the liquid crystal
shutter.
If the 3D Eyewear does not receive any signals from
●
the TV for about 5 minutes, the 3D Eyewear will be
turned off automatically.
Do not soil the infrared receiver section or attach stickers etc. to it.
●
Viewing 3D images
3D Eyewear
Power button of the 3D Eyewear
(bottom side of the 3D Eyewear)
Switches the 3D Eyewear on or off.
Press the button for about 1 second to turn the power
●
on. The power lamp lights for about 2 seconds and
then goes off.
To turn the power off, press the button for about 1
●
second again. The power lamp flashes 3 times, then
the 3D Eyewear turns off.
Lenses - Liquid Crystal Shutter
Controls the images for 3D viewing.
The left and right liquid crystal shutters
●
are alternately opened and closed in
time with the images on the TV screen to
achieve the 3D effect.
Part names and functions
Battery cover
When using for the first time, remove the insulating sheet.
●
Nose pad installation section
If required, attach the nose pad.
To attach the nose pad
●
“Attaching the nose pad” (p. 24)
Specialised band attaching parts
If required, attach the specialised band.
To attach the band
●
“Attaching the specialised band” (p. 24)
Infrared receiver
Receives infrared signals from the TV.
3D Eyewear is controlled by receiving infrared signals from the
●
TV, which allows you to view 3D images.
To replace the battery
●
“Replacing the battery” (p. 23)
Use either nose pad A or B for your preference.
●
3D Eyewear can be worn over vision correction glasses.
●
3D Eyewear set
TY-EW3D10W
●
Pull the insulating sheet
Insulating sheet
Power lamp
Power button
3D Eyewear
Specialised band
Nose pad A
Nose pad B
3D Eyewear case
