Specifications
101
3D Eyewear
Lens type
Liquid Crystal Shutter
Usage temperature range
0 °C - 40 °C
Charging power supply
DC 5 V (supplied by USB terminal of a Panasonic TV)
Battery
Lithium-ion polymer rechargeable battery
DC 3.7 V, 70 mAh
Operation time*
1
: Approx. 30 hours
Charging time*
1
: Approx. 2 hours
Viewing range*
2
Transmitter for 3D Eyewear
Within 3.2 m from front surface
(Within ± 35° horizontal, ± 20° vertical)
Materials
Main body: Resin
Lens section: Liquid crystal glass
Dimensions
(not including
nose pad part)
Width
170.1 mm
Height
41.2 mm
Overall
length
169.8 mm
Mass
Approx. 38 Net
*
1
Operation time/charging time
•
The battery deteriorates after repeated use, and the operation time eventually becomes short. The
figures above are at shipping from the factory, and are not a guarantee of performance.
*
2
Viewing range
•
The location of the 3D Eyewear transmitter differs depending on the model of television.
•
There are differences in the viewing range of the 3D Eyewear among individuals.
•
The 3D Eyewear may not operate correctly at the outside of the viewing range.
Wireless LAN Adaptor
Power supply
DC 5V (USB powered) 500mA
Antenna
T × 1, R × 2
Interface
USB 2.0
Standard Compliance
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system
MISO-OFDM system, OFDM system, DSSS system
Frequency Range
IEEE802.11n / IEEE802.11a: 5.150 GHz - 5.850 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n: 2.400 GHz - 2.4835 GHz
Transfer rate (standard) *
IEEE802.11n: Tx Max. 150Mbps, Rx Max. 300Mbps
IEEE802.11g / IEEE802.11a: Max. 54Mbps
IEEE802.11b: Max. 11Mbps
Access Mode
Infrastructure mode
Security
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64bit/128bit)
Dimensions (W × H × D)
30.00 mm × 10.72 mm × 94.85 mm
Mass
25 Net
* Transfer rates are theoretical values; however, actual communication rate will vary according to
communication environment or connected equipment.
Note
•
Design and Specifications are subject to change without notice. Mass and Dimensions shown are
approximate.