V
iewing 3D images
28
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical
noise.
1
Attach the ferrite core as close to USB
connector of the charging cable as shown.
Mini USB connector
USB connector
2
Close the ferrite core until it clicks.
USB connector
Charging the 3D Eyewear (rechargeable type)
To charge when the TV is in the Standby mode
BD/DVD
TV
POWER
INPUT
TV
AV
SD CARD
ASPECT
EXIT
INFO
OPTION
RETURN
INDEX HOLD
STTL
TEXT
R
G
Y
B
jkl
ghi
mno
tuv
pqrs
wxyz
abc
def
MUTE
LAST VIEW
CH
VOL
CH
POWER REC
TV
MENU
1. Display the menu
MENU
“How to Use the Menu Functions” (p. 34)
2. Select [Setup]
3. Select [Other Settings]
2/2
System Menu
Other Settings
Access
access
select
4. Select [USB Charge in Standby] and set [On]
USB Charge in Standby
Off
Power Save
Region Select
Daylight Saving Time
Other Settings
On
access
select
[USB Charge
in Standby]
store
select
[On]
5. Turn off the television power, and set
the 3D Eyewear power switch to “OFF”
6. Connect as shown
USB connector
Mini USB connector
•
The indicator lamp lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete.
(Approximately 2 hours required)
7. Remove the charging cable
To charge when the TV is on
1. Turn off the television power, and set the 3D Eyewear power switch to “OFF”
2. Connect as shown above, and turn on the television power
•
The indicator lamp lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete. (Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable