How to Use the Menu Functions
41
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode
•
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[On]
[Intelligent Auto Standby]
[On (No reminder)]
[Auto Standby]
[2 hours]
Recording Setup
Formats the connected USB HDD / insert SD card and sets the condition
(p. 54 - 56)
Child Lock
Locks a channel / AV input to prevent access to it (p. 50)
Tuning Menu
Favourites Edit
Creates a list of favourite channels (Digital TV mode) (p. 44)
Channel List
Skips the unwanted channels or edits channels (p. 44, 46)
Auto Tuning
Sets all Digital TV or Analogue TV channels automatically (p. 45, 46)
Manual Tuning
Sets the TV channels manually (p. 45, 46)
Update Channel List
Updates the channel list while keeping your settings (Digital TV mode) (p. 45)
New Channel
Message
• Off
• On
Selects whether to give a notification message when a new channel is
found (Digital TV mode) (p. 45)
Signal Condition
Checks the Digital TV signal condition (Digital TV mode) (p. 45)
Add TV Signal
Adds the TV mode
•
This function is available if you skip any modes to tune in [Auto Tuning]
for first using the TV.
•
To operate, refer to the [Auto Tuning] operations for first using the TV (p. 13).
Display Settings
Teletext
The item is not used for this model.
Input Labels
Labels or skips each input terminal (p. 51)
Banner Display
Timeout
• 0 (No display)
• 1 / 2 / 3 / 4 / 5 /
6 / 7 / 8 / 9 /
10 seconds
Sets how long the information banner stays on screen (p. 19)
VIERA Connect
Banner
• Off
• On
Sets the VIERA Connect introduction banner display (p. 17)
Playing Time
Display
• Off
• On
Sets to [On] to display a continuous record of time spent using Game
mode every 30 minutes
•
This function is available when [Game] is selected in [Viewing Mode]
(p. 35).
VIERA
Link Settings
VIERA Link
• Off
• On
Sets to use VIERA Link functions
•
VIERA Link functions become available when [VIERA Link] is set to [On]
(p. 81).
HDMI Content Type
• Off
• Auto
Adjusts the picture settings according to the content type from the
connected equipment via HDMI cable
•
This function is available if the connected equipment supports HDMI
Content Type.
•
The content type information will be displayed for several seconds when
this function works.
Power on Link
• Off
• On
Sets to use Power on Link functions (p. 82)
Power off Link
• Off
• On
Sets to use Power off Link functions (p. 82)