background image

35

Advanced

Advanced Settings 

(freesat)

Connect 

to the 

Broadband 

network

Network 

Setup

Sets the network settings for future applications from broadcasters to enable greater 

interactivity and added features for freesat services.

• 

To connect to your network   p. 56 and p. 60

 

Connect to network

Performs automatic testing of the network connection for the TV.

 

 Set the network setting items   

see below

 

 Select “Connect to network” and access to test

• 

It takes a while to test.

 access

 select

Connected

The test is successful and the network settings become effective.

Not connected

Check the settings and connections, and then perform this function 

again.

 

Acquire IP address

 

Acquire DNS address

Sets IP address, Subnet mask, Gateway, Primary DNS and Secondary DNS.
For most users, the recommended method of connection to your network is by using 

Auto feature.

Select “Acquire IP address” and then set to “Auto”
Select “Acquire DNS address” and then set to “Auto”

• 

The available settings are displayed automatically.

 set
 select

Manual settings

If you wish to set these functions manually, select “Manual”.
Select “IP address”, “Subnet 

mask”, “Gateway”, “Primary DNS” 

or “Secondary DNS”

Move the cursor and enter the 

number

select

move

 

Proxy

Sets Proxy address.

• 

This is the address of the relay server that is connected to the target server instead 

of the browser and sends data to the browser. Setting is required if speci

fi

 ed by the 

provider.

 Select “Proxy”

 Enter the address

 access

 select

Proxy

Host

http://

A B C D E F G H I

J K L M N

U V W X Y Z

0 1 2 3 4 5 6

a b c d e

f

g h

i

j

k

l m n

u v w x y z

(

) + -

.

* _

O P Q R S T

7 8 9

!

:

#

o p q r

s

t

Set characters

Store

 set

 select

 

RETURN

 

Proxy port

Sets Proxy port number.

• 

This number is also speci

fi

 ed by the provider with the Proxy address.

 Select “Proxy port”

 Move the cursor and enter the number

select

move

 

Speed mode 

(Auto / 10base half / 10base duplex / 100base half / 100base duplex)

Sets the LAN speed setting.

• 

Set to “Auto” normally.

• 

If “Connect to network” test fails, try the other speed modes.

Select “Speed mode” and then set the speed mode

 set
 select

 

MAC address

MAC address is a unique address that identi

fi

 es hardware in the network. 

(for information only)

Summary of Contents for Viera TX-32LZD81





































































Reviews: