Panasonic Viera TX-42AS650E Ehelp Download

Page: 230 / 238

- 230 -

Touch Pad Controller does not work or cannot be registered

●

Are the batteries installed correctly?

●

The batteries may be running low. Replace them with new ones.

●

Functions > Touch Pad Controller > Settings

●

Use Touch Pad Controller within approx. 3.2 m from the TV. (The range

may be shortened depending on the obstacles between the TV and the

controller, or the surrounding environment.)

Voice Control function does not work

●

Voice Control function may not work properly depending on the

pronunciation, noise and network environment.

●

For details

Functions > Voice Control

The display panel moves slightly and clattered sound is heard when it is

pushed with a finger

●

There is a little gap around the panel to prevent damage to the panel. This

is not a malfunction.

Summary of Contents for Viera TX-42AS650E















































































































































































































































Search results

Summary of Contents for Viera TX-42AS650E

Reviews:

Related manuals for Viera TX-42AS650E

Brands by name

Popular brands

Panasonic Viera TX-42AS650E, Ehelp

Search results

Summary of Contents for Viera TX-42AS650E

Reviews:

Related manuals for Viera TX-42AS650E

Brands by name

Popular brands