background image

- 124 -

USB devices

 

It is recommended to connect the device to the TV’s USB port directly.

 

Some USB devices or USB HUB may not be used with this TV.

 

You cannot connect any devices using a USB card reader.

 

Additional information for the devices may be found on the following 

website.
http://panasonic.net/viera/support (English only)

 

USB Flash Memory

USB Flash Memory format:

FAT16, FAT32 or exFAT

 

USB HDDs formatted on a PC are not guaranteed to work in Media Player.

 

USB HDD

 

The capacity of USB HDD that works with this TV is from 160 GB to 3 TB.

 

Connect the USB HDD to the socket outlet to record and play back 

properly with this TV.

 

Use the USB HDD formatted with this TV.

 Recording > USB HDD setup > Setting for USB HDD

 

Regarding performance, not all USB HDDs are guaranteed. Check the 

USB HDDs that have been tested for compatibility with this TV at the 

following website.
http://panasonic.net/viera/support (English only)

Photo format

 

Supported Photo formats

 

JPEG (.jpg, .jpeg, .mpo)
Sub-sampling:

4:4:4, 4:2:2, 4:2:0

Image resolution (pixel):

8 × 8 to 30 719 × 17 279

 

DCF and EXIF standards

 

Progressive JPEG is not supported.

Summary of Contents for Viera TX-42AS650E















































































































































































































































Reviews: