5
Caution
When cleaning the TV, remove the
mains plug
Cleaning an energized TV may cause electrical shock.
When the TV is not going to be used for
a long period of time, remove the mains plug
To prevent fall and injury, remove TV from its
xed wall position when it is no longer in use
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live socket outlet.
Remove the mains plug from the wall socket before
connecting or disconnecting leads.
Allow sufficient space around the TV for
radiated heat
Minimum distance
When using the pedestal, keep the space between the
bottom of the TV and the surface where the TV is set.
In case of using Wall-hanging bracket, follow the manual of it.
Do not block the rear air vents
Blocked ventilation by newspapers, table cloths, curtains,
etc. may cause overheating, fire or electrical shock.
Do not expose your ears to excessive
volume from the headphones
Irreversible damage can be caused.
Notes
Auto power standby function
If no signal is received and no operation is
performed in Analogue TV mode for 30 minutes,
the TV will automatically go to standby mode.
Keep the TV away from these types
of equipment
Electronic equipment
In particular, do not place video equipment near
the TV (electromagnetic interference may distort
images / sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Transport only in upright position
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent (1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is
dry.
Caution
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
Take care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may
degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
Take care not to subject the TV’s surfaces to detergent (a liquid inside the TV could lead to product failure).
Take care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may
deteriorate the surface by peeling the paint).
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
10
10
10
10
(cm)
