How to Use Menu Functions
●
(picture, sound quality
, etc.)
V
iewing
27
Menu
Item
Adjustments / Configurations (alternatives)
Sound
Volume Correction
Adjusts the volume of individual channel or input mode
Speaker Distance to
Wall
Adjusts the low frequency sound
(Over 30cm / Up to 30cm)
If the back space between the TV and wall is over 30 cm, “Over 30cm” is
●
recommended.
If the back space between the TV and wall is within 30 cm, “Up to 30cm” is
●
recommended.
MPX
Select stereo / monaural
(Mono / Stereo)
Normally: Stereo
●
Stereo signal cannot be received: Mono
●
M1 / M2: Available while mono signal is transmitted
●
Analogue mode only
●
SPDIF Selection
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
terminal
(Auto / PCM)
Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
HE-AAC and MPEG are output as PCM.
PCM : Digital output signal is fixed to PCM.
DVB mode or Movie View Mode (p. 48) only
●
MPEG Optical Level
Normally, MPEG sound is larger comparing with the other types of audio track
You can adjust the audio level of MPEG output from DIGITAL AUDIO OUT terminal as
the initial setting
(0 / -2 / -4 / -6 / -8 / -10 / -12dB)
DVB mode only
●
HDMI1 / 3 Input
Select to fit the input signal
(Digital / Analogue)
(p. 63)
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
●
HDMI2 terminal is for digital signal only
●
No setting for HDMI2 available
●
Reset to Defaults
Press the OK button to reset the present Sound Mode to the default settings
Setup
Off Timer
Sets the time the TV automatically turns Off
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Link Settings
VIERA Link
Sets to use VIERA Link functions
(Off / On)
(p. 53)
Q-Link
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder
(AV1 / AV2)
(p. 52)
Select the connected terminal to the recorder even it is not compatible with Q-Link.
●
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
Monitor: Image displayed on screen
●
Component, PC and HDMI signals cannot be outputted.
●
Power on Link
Sets to use Power on Link function
(Off / On)
(p. 52 and p. 53)
Power off Link
Sets to use Power off Link function
(Off / On)
(p. 52 and p. 53)
Standby Power
Save
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption
(Off / On)
(p. 54)
This function is available when “VIERA Link” is set to “On” and “Power off Link” is set
●
to “On”.
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
(Off / On (With reminder) / On (No reminder))
(p. 54)
This function is available when “VIERA Link” is set to “On”.
●
Download
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
DVB-S and DVB-C channel settings cannot be downloaded.
●
A different menu will be displayed while PC or SD Card is used. (p. 47 - 49)
●
Only available items can be selected.
●
