Displaying PC Screen on
TV
●
V
iewing from SD Card (VIERA
IMAGE VIEWER)
●
Advanced
EXIT
DIRECT TV REC
ASPECT
OPTION
RETURN
TEXT STTL INDEX HOLD
MENU
N
INPUT
TV
AV
51
Displaying PC Screen on TV
1
Select the external input
AV
2
Select “PC”
Input Selection
AV1
AV2/S
AV3/S
COMPONENT
PC
HDMI1
HDMI3
HDMI2
TV
access
select
Corresponding signals
●
p. 64
If “H-freq.” or “V-freq.” is shown in red,
●
the signals may not be supported.
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
To connect PC
●
p. 61
To return to TV
■
TV
PC menu setting
■
(changed as desired)
To make settings
●
“How to Use Menu Functions” to (p. 26)
Menu
Item
Adjustments / Configurations (options)
Picture
Advanced
PC
Settings
W/B High R
White balance of bright red area
and
repeatedly adjusted
W/B High B
White balance of bright blue area
W/B Low R
White balance of dark red area
W/B Low B
White balance of dark blue area
Gamma
Switches the gamma curve
(S Curve / 2.0 / 2.2 / 2.5)
Reset to
Defaults
Press the OK button to reset to the default Advanced PC Settings
Setup
PC
Setup
Input
Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
●
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
●
Clock
Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
Adjust after Clock adjustment
●
Set to the minimum level if noise occurs
●
Sync
Chooses another synchronous signal if the image is distorted
(H & V / On Green)
H & V : by the horizontal and vertical signals from your PC
●
On Green : by the green signal from your PC (if available)
Reset to
Defaults
Press the OK button to reset to the default PC Setup settings
Other items
●
p. 30 - 33
Note
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using HDMI cable
●
(p. 63).
