16
SQT0936
Operations
Using this system
Preparation
≥
Turn on the TV and/or connected device.
1 Press [
Í
] to turn on the main unit.
2 Select the source.
≥
This remote control cannot be used to control the
operations of the connected devices.
∫
When “BD/DVD” or “AUX” is
selected as the source
On the TV and the connected device:
Select the TV’s input for this system and start
the playback on the connected device.
∫
When “BLUETOOTH” is selected as
the source
On the Bluetooth
®
device:
Select this system as the output source of the
connected Bluetooth
®
device and start the
playback.
∫
To adjust the volume of this system
Press [
j
VOL
i
].
≥
Volume range: 0 to 100
∫
To mute the sound
Press [MUTE].
≥
While muting, “MUTE” is indicated on the display.
≥
To cancel, press the button again or adjust the volume.
≥
Muting is cancelled if the main unit is turned off.
≥
If there is sound coming out of the TV’s speakers, reduce
the volume of the TV to its minimum.
≥
There may be a difference in the maximum volume value
of the TV and the unit.
≥
When playing equipment connected to the HDMI AV IN
terminal, to switch audio/video to the TV, switch input to
the TV tuner. If VIERA Link (HDMI) (
>
26) is not
enabled, also switch the input of this unit to TV.
When other Panasonic devices respond to this
system’s remote control, change the remote
control code on this system and the remote
control.
Preparation
≥
Turn off all other Panasonic products.
≥
Turn on the main unit.
≥
Aim the remote control at this unit’s remote
control sensor.
∫
To set the code to “REMOTE 2”
While pressing and holding [MUTE], press
and hold [OK] for 4 or more seconds.
“REMOTE 2” is indicated on the display.
∫
To set the code to “REMOTE 1”
While pressing and holding [MUTE], press
and hold [
4
] for 4 or more seconds.
“REMOTE 1” is indicated on the display.
Press
To select
[INPUT]
“TV”
#
“BD/DVD”
#
“AUX”
^----
“BLUETOOTH”
(-}
≥
When switching the source to
“BLUETOOTH” and then to
“TV” in succession, after
switching it to “BLUETOOTH”,
wait for a while, and press
[INPUT].
[
-PAIRING]
Select the Bluetooth
®
device as the source.
(
>
19, 20)
SOUND
INPUT
SETUP
OK
1
2
If this system does not operate as
expected or sound is unusual, returning
the settings to the factory preset may
solve the problem. (
>
28)
Remote control code
SC-ALL30T-SQT0936.book 16 ページ ２０１５年４月２０日 月曜日 午後２時３８分
