Wall mounting
Make sure that the wall is strong enough to support the weight of the repeater.
1
Place the reference for wall mounting on the wall to mark the 2 screw positions.
2
Install the 2 screws (locally procured) into the wall.
R
Make sure that the screw heads are at the same distance from the wall.
R
Install the screws perpendicular to the wall.
3
Hook the repeater on the screw heads.
Reference for wall mounting
Print the following guide and use it as a reference for wall mounting.
R
Make sure to set the print size to correspond with the size of pages in this manual. If the dimensions of
the printed paper are not exactly the same as the dimensions of this guide, use the measurements
indicated in the guide.
A
A
B
A
Install screws in these positions.
B
37 mm
9
