15
2-2 How to make wiring connections
While pressing on the button (
F
) with a
pointed object such as a screwdriver, insert
the wire into the terminal connector (
G
). (To
disconnect a wire, pull out the wire while
pressing on the button (
F
).)
H
Bare wire at tip: 9mm
I
Wiring from doorphone
Important:
Do not connect the power cable.
(Damage may occur.)
3
Mount the main monitor/extension monitor to
the mounting bracket.
3-1 Line up the tab on the bottom of the
bracket with the groove on the main monitor/
extension monitor.
3-2 Line up the tab on the top of the bracket
with the groove on the main monitor/extension
monitor, and push the main monitor/extension
monitor down until it is secure.
G
H
F
I
Notes about electrical wiring
Make sure not to pinch
the wires (as shown to
the right) on the mounting
bracket when installing.
R
Do not forcibly attach
to the mounting
bracket.
273_ig.book Page 15 Friday, April 28, 2017 9:46 AM
