background image

Disposal of Old Equipment (Only for European Union
and countries with recycling systems)

A

This symbol (

A

) on the products, packaging, and/or

accompanying documents means that used electrical
and electronic products must not be mixed with general
household waste.
For proper treatment, recovery and recycling of old
products, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further
information.

Information on Disposal in other Countries outside
the European Union

This above symbol (

A

) is only valid in the European

Union. If you wish to discard this product, please contact
your local authorities or dealer and ask for the correct
method of disposal.

1.6 For India only

Declaration of Conformity with the requirements of
the E-Waste (Management) Rules

The Product is in conformity with the requirements of the
reduction of hazardous substances of the E-Waste
Rules.
The content of hazardous substance with the exemption
of the applications listed in SCHEDULE II of the E-Waste
Rules:

1.

Lead (Pb) – not over 0.1% by weight;

2.

Cadmium (Cd) – not over 0.01% by weight;

3.

Mercury (Hg) – not over 0.1% by weight;

4.

Hexavalent chromium (Cr6+) – not over 0.1% by
weight;

5.

Polybrominated biphenyls (PBBs) – not over 0.1% by
weight;

6.

Polybrominated diphenyl ethers (PBDEs) – not over
0.1% by weight.

Disposal information

For the purpose of recycling to facilitate effective
utilization of resources, please return this product to a
nearby authorized collection centre, registered
dismantler or recycler, or Panasonic service centre when
disposing of this product.
Please see the Panasonic website for further information
on collection centres, etc., or call the toll-free number
below.

Website:
http://www.panasonic.com/in/corporate/sustainability/
panasonic-india-i-recycle-program.html
Service helpline: 1800 103 1333 or 1800 108 1333

1.7 For Europe

For information of Compliance with EU relevant
Regulatory Directives,
Contact to Authorised Representative:

Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
http://www.ptc.panasonic.eu/doc

5

1. Important Information

Summary of Contents for VL-PS240













Reviews: