Supplied accessories for installation
*1
Mounting base × 1
Screw × 4
(4 mm × 12 mm)
Screw × 2
(3.8 mm × 20 mm)
Name plate × 2
(incl. 1 spare)
Hex wrench × 1
*1 VL-V555BX/SX models only
Important:
R
You will need the following additional items to install and configure the doorphone. [Locally
procured]
– Screw × 2 (for mounting base): VL-V555EX/FX models only
Prepare the screws ( → the drawing on the right) according to the material,
structure, strength and other factors of the mounting area and the total weight
of objects to be mounted.
4 mm
– Wires (for doorphone and other connections):
Prepare cables and wires of the appropriate specification.
Note:
R
In the event of problems, you should contact your equipment supplier in the firstinstance.
R
VL-V555EX/FX/BX models only: Please refer to the "General information" section in the Video Intercom
System Operating Instructions for information regarding the R&TTE Directive.
R
The illustrations in the supplied manual(s) may vary slightly from the actual product.
Location of controls
F
A
B
C
D
E
G
A
Lens cover
B
LED lights
– Used to illuminate the visitor’s face or the area in front of
the doorphone so that the vistor’s face can be seen in the
dark.
C
Name plate (supplied accessory)
– Can be attached as required when installing the
doorphone.
D
Microphone
E
Camera lens
F
Speaker
G
Call button and indicator (red)
– Lights in red when the power is on.
Doorphone image quality
The following phenomena may occur. They are not malfunctions.
R
If strong light such as sunlight shines into the camera lens, uneven colouring from reflected light, or
white lines or circles may appear in images.
R
Images may appear distorted because of the characteristics of the camera lens.
R
When there is poor light in the area around the doorphone or at night:
– Areas lit with external lights or white objects may appear greenish.
– Even when the doorphone’s LED lights are lit, because the light from the LED lights cannot illuminate
the edges of the visible area (the areas directly next to the doorphone), faces of people may not be
identifiable even when they are close to the doorphone.
(We recommend installing extra lights in the area around the doorphone.)
Specifications
Power source
Power supplied by the main monitor
Dimensions (mm) (height
×
width
×
depth) Approx. 169
×
118
×
30 (excluding protruding sections)
Mass (weight)
Approx. 395 g
Operating environment
Ambient temperature: approx. -15 °C to +55 °C
Relative humidity (non-condensing): up to 90 %
Viewing angle
*1
Horizontally: approx. 170°
Vertically: approx. 130°
Installation method
Wall mount (mounting base supplied)
Minimum illuminance required
1 lx (within approx. 50 cm from the camera lens)
Lighting method
LED lights
IP rating
IP54
*2
IK rating
Compliant with IK07
*1 When connected to the Video Intercom System VL-SVN511 series.
*2 Water resistance is only assured if the doorphone is installed correctly according to the instructions
in the Installation Guide, and appropriate water protection measures are taken.
Note:
R
Design and specifications are subject to change without notice.
R
Names, company names, product names, software names, and logos mentioned in this manual are
trademarks or registered trademarks of the companies concerned.