13
MAINTENANCE CLEANING
I
(
)
MAINTENANCE CLEANING
I
(
)
Disconnect power source before working on unit. Routine
maintenance must be done every year.
WARNING:
CAUTION:
1. Never use petrol, benzene, thinner or any other such
chemicals for cleaning the ventilating fan.
2. Do not damp water to enter motor.
3. Do not soak resin parts in water over 60 C.
o
1. Remove grille. (Squeeze mounting spring and pull down
carefully.) (Fig.22)
2. Wash and clean grille. (Use non-abrasive kitchen detergent,
wipe dry with new cloth.) (Fig.23)
Fig. 23
3. Remove dust and dirt from fan body using a vacuum
cleaner. (Remove lamps if necessary.) (Fig.24)
4. Using a cloth dampened with kitchen detergent, remove
any dirt from fan body. Wipe dry with new cloth. (Fig.25)
5. Replace lamps and grille.
MAINTENANCE
II
(REPLACEMENT OF LAMP)
MAINTENANCE
II
(REPLACEMENT OF LAMP)
1. Disconnect power source before working on unit.
2. The lamp's glass is fragile. Please handle with care. To remove lamp, grasp at base and move back
and force to loosen. Do not pull hard on the lamp or you may break the glass.
3. 4W night lamp has threaded base. Remove by turning counterclockwise.
Fig.24
Vacuum cleaner
Fig.25
Fig. 22
Slot
Mounting
spring
Grille
Gloves
