11
5.Replacement Guide
INSTALLATION
8. Insert the other mounting spring into the slot as
shown and mount grille to fan body. (Fig.8)
Fig.7
Fig.8
7. Insert the grille mounting spring on the wiring
side into the slot and insert the plug connector
into the housing of the lighting unit.(Fig.7)
Mount grille carefully so that lead wire of
lighting unit is not pinched.
Before turn on the light, make sure the
connector at the correct position. If not, the
lighting can’t work.
The claw of connector must latch the rib
completely. (Fig.7)
Ceiling
Grille
Grille
Ceiling
Gloves
Gloves
Rib
Claw
Insert
lighting unit
lighting unit
Plug connector
Plug connector
Mounting spring
Mounting spring
CAUTION
CAUTION
Fig.6
Secure screw
(M4X8)
Light kit cover
assembly
6. Install light kit cover assembly. (Fig.6)
