Emergency
VOLUME
EXTENSION
UNLOCK
TALK
呼出音量
室内呼
解錠
通話
EMERG.
非常
LOBBY
ロビー
LOBBY
ロビー
MANAGER
管理
MANAGER
管理
Press the button to stop
the alarm sound, etc.
When the Area around the MENU Button Flashes in Red
Page
156 to 159
Page
161
Page
162
Page
164
Page
171
STOP
ALARM button
MENU
button
A fire has broken out.
Check the situation and take appropriate measures such
as initial fire extinguishing, reporting, or evacuation. The
alarm sound will be stopped by pressing the STOP ALARM
button of the base unit. If the item number begins with
VGDT, the alarm sound can also be stopped by resetting
the detector and operating the residential receiver or the
integrated control panel, etc. in the building manager
room. If the item number begins with VGDB, the sound can
also be stopped by resetting the detector.
Gas has been leaking.
Shut off the main gas valve and open the
windows and the doors to ventilate the
room. The alarm sound will be stopped
by pressing the STOP ALARM button of
the base unit or the gas has gone.
The gas and CO Alarm has detected
incomplete combustion (carbon
monoxide).
Open the windows and the doors to ventilate the
room. Stop using the device that is causing the
incomplete combustion. The alarm sound will be
stopped by pressing the STOP ALARM button or
incomplete combustion is no longer detected.
The Call button has been pressed.
Confirm the call and take
appropriate measures. The call
sound will be stopped by pressing
the STOP ALARM button or the call
button is reset.
The EMERGENCY button or an
other emergency button has been
pressed.
Confirm the details and take
appropriate measures such as
informing neighbors. The alarm
sound will be stopped by pressing
the STOP ALARM button or the
EMERGENCY button or the other
emergency button is reset.
Besides these screens on this guide, security alarm
or the Earthquake Early Warning System (prediction),
etc. appear on the screen. Refer to the operation
manual (CD-ROM) to handle these warnings.
•
The example for Visitor Record
●
For base unit
MENU button
EMERGENCY button
●
For base unit
Receiving a Call
(For Call Sub-base Unit)
Page
35
When the Area around the MENU Button Flashes in Blue
Page 58 to 60
Page 156 to 175
Extension Call
(For Call Sub-base Unit)
Page
45
When receiving a call from the main entrance, unit entrance, or building manager room, call tone will ring.
For main entrance: TALK button (flashing in red)/LOBBY indicator (lighting up in red)
For unit entrance: TALK button (flashing in yellow),
For building manager room: TALK button (flashing in red)/ MANAGER indicator (lighting up in red)
1
•
A”beep” is played and then the TALK button will turn from flashing to lighting.
Press the TALK button
1
Press the EXTENSION button
4
Press the TALK button to end
2
•
The conversation will automatically end in approximately 1 minute. (When the call is from the building
manager room (without video capability), it will end in approximately 4 minutes.)
Talk into the microphone
Note
If you do not press the TALK button to end the call, the room sound will be transmitted to
the caller.
3
Press the TALK button to end the call
•
A "beep" sound is played, the TALK button turns off, and the call ends.
(When the call is from the main entrance, the LOBBY indicator will turn off. When the call is
from the building manager room, the MANAGER indicator will also turn off.)
Press the UNLOCK button flashing in green
while talking with the main entrance
Unlocking the Main Entrance (illuminated UNLOCK button)
Page
35
•
The main entrance is
unlocked and then the
conversation will
automatically end in
approximately 5 seconds.
UNLOCK
button
Flashes when the door can
be unlocked (illuminated
UNLOCK button)
EXTENSION
button
TALK
button
2
Call tone "beep" sounds
•
After calling, you can talk for approximately 10 seconds even without pressing the TALK button. (The TALK
button lights up in green.)
•
After approximately 10 seconds, the status changes to the waiting state of answering (the call is ended
once) and the TALK button goes off.
3
Talk once the call destination answers
•
It is enabled to talk with the base unit or sub-base unit which replied.
• When the area around the MENU button flashes in blue, there are notifications of visitors etc. during
your absence. The Notice screen will appear by pressing the MENU button.
• The flashing will disappear after confirming all visitors’ images during your absence or all
notifications.
• When the area around the MENU button flashes
in red, an alarm is issued. The alarm screen will
appear by pressing the MENU button.
• The flashing will disappear after finishing
resetting of the issued alarm.
1
Press the MENU
button
2
Touch the detail you
want to check
3
Performing
Confirmation
■
Meanings of Major Alarm Screen Displays and Measures
Some screens do not appear depending on the equipment
or function settings of the building of your residence.
MANAGER indicator
LOBBY indicator
Microphone
Fire
Gas
Ventilation
Call 1