復旧/警報音停止
RESET/ STOP ALARM
OPEN
電源
火災
POWER
FIRE
留守
警戒
戸締り
NOTHOME
ガス
GAS
SET
復旧/警報音停止
RESET/ STOP ALARM
OPEN
電源
火災
POWER
FIRE
留守
警戒
戸締り
NOTHOME
ガス
GAS
SET
Continued on the next page
If a call is received from the unit entrance
while talking with the main entrance
Receiving a Call While Talking
Starting the conversation with the new caller needs to end the current conservation.
Please tell the current caller to end the conversation before switching to the new caller.
●
The current conversation ends.
●
The display changes from the sub-screen to the full-screen.
2
Press the TALK button
1
Call source appears on
the sub-screen
If a call is received from the unit entrance while talking
with the building manager room (without video capability)
1
Call source appears on
the sub-screen
If a call is received from the main entrance while talking
with the unit entrance (door phone without camera)
●
The functionality is the same as when receiving a
call from the building manager room or other unit.
●
The functionality is the same as when receiving a
call from the building manager room or other unit.
●
The functionality is the same as when talking
with another unit.
1
Call source appears on
the sub-screen
If a call is received from the main entrance while talking
with the unit entrance (door phone with camera)
Call source appears on
the sub-screen
For Base Unit/Call Sub-base Unit with Monitor
●
The call with the main entrance continues.
●
The call with the unit entrance continues.
●
The call with the building manager
room continues.
●
The call with the unit entrance
continues.
Configure the Not-home Setting
(For base unit)
●
Call source appears on the sub-screen, which changes to a blue screen. (The sub-screen turns
blue even when called from the lobby phone with camera or door phone with camera.)
●
Touching the sub-screen does not switch the display back to the main screen.
●
Calls cannot be received from the building manager room or other units when talking with the
main entrance and vice versa.
●
If a call is received while talking between extensions, then the extension call ends to receive
the call.
The Main Entrance
number is not shown
on the call sub-base
unit with monitor.
Only "Main Entrance"
appears.
Video appears
instead of a blue
screen when
the caller is the
building manager
room (with video
capability).
The Main Entrance
number is not shown
on the call sub-base
unit with monitor.
Only "Main Entrance"
appears.
Note
1
NOT HOME
indicator
lights up in red
MENU button
Press
38
39
1
2
Touch
Deactivating the Not-home Setting
Press the MENU button in the
waiting state (nothing is
displayed on the screen)
●
The Top Menu screen appears.
●
The NOT HOME indicator lights up in
red when the Not-home setting is
configured.
4
Press the OFF button to exit
NOT HOME
indicator
turns off
3
The Not-home setting is
deactivated
●
switches to .
●
The NOT HOME indicator turns off.
●
It will return to the waiting state (nothing
is displayed on the screen).
The screen will automatically turn off when no
operation is performed for 30 seconds.
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
Touch
Note
Press
OFF
終了