92
93
Setting item
Setting content
Initial setting
Page
Extension Light
Setting
119
Manual
Main unit
21:00 to 07:00
Mute Setting
Sets the time zone not to accept the return home
notification.
Record Save
Destination
—
Eject
Operate this to eject the microSD memory card.
Sets the save destination of the visitor recording
(video, sound).
—
Operate this to initialize the microSD memory card.
Initialize
110
to
112
Japanese
Language
Sets the language for the screen display and audio
guidance to either Japanese or English.
114
Off
Sets thesecurity number for individual authentication
to unlock the main entrance.
115
Private Security
Number Setting
(*1)
117
to
118
Setting According to Your Preferences
Setting item
Setting content
Initial setting
Page
Medium
Medium
High
High
High
Medium
Medium
High
Medium
Intensity 3
Intensity 4
Intensity 5-lower
Intensity 5-higher
Intensity 6 or higher
Erroneous Report
Intensity 4 or lower
Intensity 5-lower or higher
Erroneous Report
120
*1: This is not displayed unless the setting on the control device or the integrated control panel is performed.
(Consult with the management company or the company that installed the system.)
*2: This is displayed when a microSD memory card is inserted in the main unit.
*3: This is displayed when set to "Mobile device adapter setting: With connection" in "Connected device setting" of
installation setting, and the mobile device adapter (supports smartphone and tablet) (sold separately) is connected.
121
to
122
124
to
125
123
Earthquake
Setting
(*1)
Mobile Device
Registration
Registers smartphones etc. to the mobile device
adapter.
Not registered
Mobile Device
Information
Confirms the state of the mobile device adapter and
device information.
—
Delete All
Mobile Device
Deletes the registration of smartphone, etc., registered
in the mobile device adapter.
—
Charging
Start Notification
Sets if start of the EV charging is notified or not.
On
Setting
Initialization
Deletes all the user setting data and returns to
the initial state.
—
Return Home
Notification Setting
(ID authentication key)
Off
Sets if the linked operation of "return home notification
to home" is performed together with the unlocking of
the main entrance with the ID authentication device.
Return Home
Notification Setting
(Private Security
Number Setting)
Off
Sets if the linked operation of "return home notification
to home" is performed together with the unlocking of
the main entrance with the private security number.
Return Home
Notification Setting
(Door Phone Notification)
Off
Sets if the linked operation of "return home notification
to home" is performed together with the calling from
the unit entrance by pressing and holding the call
button of the door phone..
Return home notification Setting (door phone
notification) is not displayed when set to "The door
phone connection: Without camera" or "The door
phone connection: Without camera (3 lines) in the
installation setting. (Consult with the management
company or the company that installed the system.)
Return Home Notification Setting
(*1)
113
Call sub-base unit 1:
Room 1
Call sub-base unit 2:
Room 2
Extension Setting
Sets the name of the call sub-base unit
Setting is possible when set to "Call sub-base unit 1
connection or call sub-base unit 2 connection: Call
sub-base unit with monitor or call sub-base unit" with
the installation setting. "Extension Setting" does not
appear when both "Call sub-base unit 1 connection"
and "Call sub-base unit 2" ae set to "Not connected".
(Consult with the management company or the
company that installed the system.)
Note
Note
No
Senior Mode Setting
116
Setting this setting to "On" will set "Ringtones volume
settings: Extra-High", "Ringtone (number of rings):
Ring Continuously", "Yuttari Talk: On", "Received call
time: 60 sec." and "Talk volume: High". The setting
value for each setting item will not
Return to original even when set to "No" when used
in the Senior mode. Change the setting value in each
setting item.
Note
SD Card Setting
(*2)
Sets if turning on/off the lighting for door phone
( · ) is performed automatically or
manually when viewing around the unit entrance (door
phone with camera) when a call is received or during
talking.
Light
ON
Light
OFF
Mobile Device
Adapter Setting
(*3)
Detailed earthquake
intensity display
Simplified
earthquake
intensity display
Sets the volume of the earthquake notification when
an earthquake occurs.
●
The call sub-base unit with monitor will sound in
the volume set in the base unit.
●
Volume of the call sub-base unit is not adjusted.
Volume is equivalent to "High".
Note
EV Setting
(*1)
Initialize
Delete
Recorded Data
—
Initializes the visitor information, management information,
recorded announcements that are recorded in the save
destination selected in the record save destination in the
SD Card Setting. All the visitor records, etc., are erased
when delete recorded data is performed.
Protected visitor records, etc., are not deleted.
Perform the delete recorded data again after
cancelling the protection.
(To Cancel Protection Page 207)
Note
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER