The target value (monthly usage) of the gas usage can be set from the past actuals or by
directly entering the target value. The target is displayed in the Intergal Power screen
( pages 78 to 79) based on this setting value, enhancing the energy saving consciousness.
142
143
Touch in the Energy Saving
Monitor screen
2
1
●
The Setting screen appears.
●
For how to display the Energy Saving
Monitor screen, see page 73.
Touch
3
●
The Target Value Setting screen appears.
Touch
●
The Gas Target Value Setting screen appears.
4
Select the setting method and
touch
Same Month in Previous Year
●
Sets by the percentage of reduction from
the usage of the same month in the previous year
Reduction from Prev Mon.
●
Sets by the percentage of reduction from
the previous month
Direct Input
●
Sets by entering the value directly
This setting can be set only when the pulse transmitting gas meter is connected.
This item does not appear when the pulse
transmitting gas meter is not connected.
Gas Target Value Setting
Setting the Energy Saving Monitor
(Eco Setting)
(For base unit)
Note
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
Press
OFF
終了
Touch
Touch
Touch
Note
●
The range of value that can be set is 1 m
3
to 100 m
3
. The screen as in right will appear
when the enterd value is out of this range.
Select to set 1/100 as the minimum
value or the maximum value. Touch
to return to Direct Input screen.
●
Select "Direct Input" in using this product
for the first time, because previous data
does not exist. A message "There is no data
for the month use in the target setting. Please reset the target value" will appear on the screen when
"Same Month in Previous Year" or "Reduction from Prev Mon." is selected. Touch and perform
the setting again. Use the usage from the gas company as a reference for the target value.
Touch
2
Touch
any one
1
Select the reduction target (%)
and touch
1
Touch
●
Returns to the Target Value Setting screen.
2
Enter the target value
1
Touch
●
Returns to the Target Value Setting screen.
2
For
Direct
Input
Press the OFF button when setting
is completed
●
It will return to the waiting state (nothing
is displayed on in the screen).
Touch to set other items
●
Returns to the Setting screen.
●
Touch to erase the entered value.
●
Enter the value in the range of 1 m
3
to 100 m
3
.
●
Initial setting: 20 m
3
●
When set to less than 1 m
3
●
When set to more than 100 m
3
6
Set the target value
5
Gas Target Value Setting (Direct Input) screen
Gas Target Value Setting
(Same Month in Previous Year) screen
Touch
2
Touch
2
1
Touch
any one
1
Touch
the numeric
buttons
For
Same Month in
Previous Year/
Reduction from
Prev Mon.
